How To Remove Crepe Myrtle Tree

  • Equip yourself with protective eyewear, thick work gloves and a mask before setting out to remove a crepe myrtle.
  • Apply oil-soluble herbicide to the bark of an immature crepe myrtle with a trunk smaller than 6 inches in diameter.
  • Cut a crepe myrtle whose trunk is up to about 12 inches in diameter down to ground level with a chain saw.
  • Drill evenly spaced holes in the remains of the trunk with a power drill.
  • Pour a concentrated systemic herbicide into the holes drilled in the trunk. This type of herbicide penetrates the crepe myrtle's vascular system, attacking the plant's roots from the inside.
  • Apply the concentrate to the flat top of the trunk with an old paintbrush.
  • Dig up immature crepe myrtles at the base of the tree with a spade or shovel.
  • Spray any shoots that appear in the location of the removed crepe myrtle with a broadleaf herbicide.
  • How do you get rid of a crepe myrtle tree?

    Answer: To stop the crape myrtle from coming up from the roots you can apply a phenoxy herbicide product like Dicamba or 2,4D. The herbicide will kill the roots too. You can also use sucker stopper which is a plant growth regulator.

    How deep are the roots of a crepe myrtle?

    Crepe myrtle roots do not sink taproots deep into the ground or send lateral roots out to crack anything in their path. In fact, the entire crepe myrtle root system is shallow and fibrous, spreading out horizontally up to three times as far as the canopy is wide.

    How do I remove a crepe myrtle stump?

    Using a power stump grinder is the most efficient way to remove your stump. Position the grinder near your stump, turn it on, and begin pushing it forward into the stump to grind away at its surface. Move it around the circumference of the stump to make sure you also grind the aerial roots.

    Is it hard to dig up a crepe myrtle?

    Moving crepe myrtles requires a bit of digging. First, dig out a new planting hole. It has to be large enough to fit all of the tree's current roots, but somewhat wider, to allow those roots to expand. Next, you need to dig out the tree.

    When should I dig my crepe myrtles?

    Ideally, you want to move crepe myrtle trees while they are dormant towards the end of winter. These trees do best when you transplant them just before their leaves return in the early spring, so try to move yours before the weather warms up.

    Do crepe myrtle have invasive roots?

    Crepe Myrtle Tree Roots

    This is why plants and grasses do not grow well when planted near crepe myrtles. Those roots compete for water, so nearby neighbors may be malformed or might not thrive. However, the roots are not invasive, so you need not worry about planting them close to concrete driveways and sidewalks.

    Do crape myrtles have big roots?

    The root system of the Crepe Myrtle tree is shallow and fibrous. The roots of this plant do not grow deep in a taproot system but in fact, these roots are weak and dense and only thrive near the surface. They extend up to three times the distance than the area covered by the plant canopy.

    How long do crape myrtles live?

    Lifespan of Crepe Myrtle

    Crepe myrtles live quite a few years if you take care of them. A crepe myrtle lifespan can exceed 50 years. So that's the answer to the question “how long do crepe myrtle trees live?” They can live a good, long time with suitable care.

    Why is my crepe myrtle growing from the ground?

    Plant your crepe myrtle in well-drained soil. Too much soil moisture can stress the plant and stimulate the growth of crepe myrtle shoots from roots to compensate for wet soil or overwatering.

    How do you transplant a large crepe myrtle?

  • Transplant in Spring or Fall. Transplanting when the ground is too cold can put stress on the crepe myrtle.
  • Prepare in Advance. Keep the severed roots moist but not constantly saturated in water.
  • Dig and Move the Plant.
  • Planting and After-Care.
  • How do you transplant a Myrtle?

  • Root prune the myrtle in mid-winter.
  • Remove weeds and vegetation from a sunny planting location in early spring.
  • Dig the planting hole on top of the worked soil.
  • Return to the myrtle.
  • Carry or drag the myrtle to the new planting site.
  • Place your garden hose on the ground near the myrtle.
  • Is a crepe myrtle a bush?

    Crape myrtle bushes (Lagerstroemia indica) are attractive varieties of multi-stemmed flowering shrubs with showy red, white, pink or purple flowers. Crape myrtle shrubs flower in summer, turning the large bushes into colorful floral displays that attract birds and pollinators.

    How big is a crepe myrtle root ball?

    Begin watering the soil around your crape myrtle daily about three or four days before the move to make transplanting it easier. On moving day, dig around and under the tree to create a two- to three-foot-wide root ball.

    Do crepe myrtles stain concrete?

    In my area it is Crepe Myrtle seeds that have fallen and stained the pavers. I have also seen pecans fall and stain a concrete surface. Any tree or shrub that drops either flowers or seeds will 'stain' concrete; ie pavers.

    Can I plant crepe myrtle close to house?

    Tip. You can plant crape myrtle near the foundation as they have non-invasive roots, according to Dayton Nursery. However, be sure to plant them far enough away from the foundation and the building so the shrub can grow to its full size without being blocked by the building.

    Are crepe myrtles poisonous to dogs?

    Many beautiful plants contain toxins that present a danger to puppies and other animals. However, the American Society for the Prevention of Cruelty to Animals reports that crepe myrtle is perfectly safe and non-toxic for animals, as well as humans.

    How tall do crepe myrtles get?

    Not only do they differ in bloom and leaf color, but also in mature size. Dwarf varieties only grow to a height of 4 feet or less. Semi-Dwarf varieties grow 4 to 8 feet tall. Large or Tree Crapemyrtle reaches a height of 10 to 20 feet.

    Should crepe myrtles be cut back?

    First of all, pruning crapemyrtles is optional; if the plant is in the correct place and can grow to its mature size, let it grow! If you need to prune your crapemyrtle tree or shrub, thinning branches to limb up the crapemyrtle is the correct method. Remove lower limbs that are thinner than a pencil diameter.

    How do you keep crepe myrtles small?

    Remove extraneous or interior branches that might cross between trunks or rub against each other, cut low branches to encourage vertical growth and prune unwanted new trunks to the ground. Eliminate any growth equal to or less than pencil width to prioritize nutrients to the main branches.

    What is the largest crepe myrtle tree?

    The largest commercially available varieties of crape myrtle usually grow between 23 and 33 feet tall. Among them is the white-flowered Kiowa (Lagerstroemia 'Kiowa'). A mature specimen at the National Arboretum in Washington, D.C., is 30 feet tall.

    Are crepe myrtles strong trees?

    Crepe myrtles are among the most ornamental trees available, emblematic of southern gardens. Their popularity stems from their generous crop of showy flowers. Although crepe myrtles are usually vigorous and hardy, it makes life easier if you have ready access to tips on caring for these gorgeous plants.

    What can you plant under a crape myrtle?

    Here are the plants that should grow well beneath your crepe myrtle trees.

  • Columbine. Columbine is a unique flower as it appears to have a bloom within a bloom.
  • Lily of the Valley.
  • Verbena.
  • Hostas.
  • Rose of Sharon.
  • Hibiscus.
  • Daffodil.
  • Chrysanthemums.
  • Do crepe myrtles attract birds?

    Crepe Myrtle flowers attract hummingbirds, as well as insects which hummingbirds and other birds eat. Many different birds eat the seeds which remain available all winter. Birds use Crepe Myrtles for shelter and nesting.

    How far back can you cut a crape myrtle?

    Maintain an attractive framework. Cut all the way back. I like branching to begin 6 to 8 feet off the ground because it looks better and is more practical. If you don't need to walk under the branches or see through them to view oncoming traffic, you can allow the branching to start lower.

    Posted in FAQ

    Leave a Reply

    Your email address will not be published.