The weight of an axe head determines the momentum generated to split wood. The heavier the head, the higher the swinging power. Since most splitting axes weigh between 3-6 pounds, this weight is ideal for splitting small and medium-sized wood. Furthermore, the weight is not too heavy for operators to control.
Table of Contents
Is a heavier axe better for splitting wood?
For smaller pieces of wood, or splitting around the wood's edges, a splitting axe is the better choice. It's lighter, easier to swing and performs similarly to a splitting maul. The wood-cutting pros at Husqvarna recommend you have both, as together they form an excellent one-two punch for your wood splitting needs.
What is the heaviest splitting axe?
The Truper 32415 Splitting Maul comes in as the heaviest option, weighing in at 12 pounds.
How do I choose a split axe?
When choosing an axe, the first question is whether you want to split bigger or smaller pieces of wood. Splitting axe blades are typically heavier, best for splitting large and medium size logs. Longer shafts give more speed and power.
Should a splitting axe be sharp?
A splitting axe should be sharp enough to avoid a bounce when it strikes harder wood pieces. It doesn't have to be razor-sharp because it splits wood along the grain. However, some woodworkers prefer very sharp splitting axes. The key is to keep the axe sharp enough to ensure efficiency.
Is a dull axe better for splitting wood?
Why You Should Buy a Maul Axe. Mauls are more effective in splitting wood than splitting axes. Their blunt wedge-shaped heads cleave through the wood to tear the fibers apart. Although they are not as sharp as splitting axes, the blunt edge drives powerful force without getting stuck.
Can you chop with a splitting axe?
These splitting axes offer one-strike splits with each swing, so logs can be split with less time, effort and hand strain. Chopping wood consists of cutting horizontal logs into segments with several sharp, downward strokes of an axe.
How do you sharpen a split axe?
What should I look for in an axe?
Beyond weight, handle length, and personal preference, here are a few basic considerations when choosing a proper axe.
How heavy is a battle axe?
Axes designed for warfare ranged in weight from just over 0.5 to 3 kg (1 to 7 lb), and in length from just over 30 cm (1 ft) to upwards of 150 cm (5 ft), as in the case of the Danish axe or the sparth axe. Cleaving weapons longer than 150 cm would arguably fall into the category of polearms.
What kind of axe do lumberjacks use?
The felling axe is an axe specifically designed for the task and usually has a double-edged, sharp surface. This particular axe is available in a variety of shapes, weights, and handle sizes, but lumberjacks generally use the larger types.
How heavy is a Dane axe?
Many of these axes were constructed with a reinforced bit, typically of a higher carbon steel to facilitate a harder, sharper edge. Average weight of an axe this size is between 1 and 2 kg (2.2 and 4.4 lb).
What is the difference between a felling axe and a splitting AXE?
The distinguishing feature of Forestry Axes is a long, rounded edge, with a flat elongated axe head. Forestry Axes are specially designed to cut across the grain of the wood fibers, for example when felling and limbing, in contrast to log splitting, where the axe goes along the grain of the wood fibers.
Is a maul good for splitting wood?
A 4-pound maul is a good option for splitting smaller lumber for a backyard fire pit or a camping trip, while a 12-pound maul is suitable for splitting large logs. An 8-pound maul is capable of splitting a good-sized log while remaining light enough for most people.
How long does an axe last?
A good quality axe can last your lifetime, and beyond, if it is properly cared for. One way to maintain your axe is by sharpening it yourself; it is a easy DIY project that anyone can learn.
Is it best to split wood wet or dry?
Although you can split wood while it's still wet, it is best to let it dry first. The lower the moisture content of the wood, the easier it will be to split because it gives less resistance when it is dry. However, split wood will dry faster than whole logs. There is more to learn about splitting and storing firewood.
How long do you wait before splitting wood?
The most important rules for preparing good firewood are: Cut, split and stack the wood in the early spring and let it stand in the sun and wind until it is seasoned. For many people seasoning will take about six months. for others, it will be a full year, depending on climate and wood species.
What type of axe do I need to split logs?
Standard splitting axes come with heads that weigh between 3 and 6 pounds. Mauls, with sledgehammer-type heads, can weigh as much as 8 pounds. Unless the plan is to compete in wood-splitting competitions, it's usually best to go with an axe head that weighs 4 to 6 pounds.
Can you use a Michigan axe to split wood?
A felling axe should not be used to split wood.
Generally if you try to split a medium sized piece of wood with a felling axe it will just get stuck in the wood and you will be lucky if you can get it out.
Is a splitting maul an axe?
A splitting maul also known as a block buster, block splitter, chop and maul, sledge axe, go-devil or hamaxe is a heavy, long-handled axe used for splitting a piece of wood along its grain. One side of its head is like a sledgehammer, and the other side is like an axe.
Can you split wood with a hatchet?
While a heavy maul excels at splitting wood, it's too heavy to carry through the backcountry, and it's too specialized. Hatchets are more all-around tools, able to bite deep enough to drop moderate trees, sharp enough to feather sticks, and stout enough to split wood.
How much does an ax cost?
A good high-value axe will cost $40-$125. These axes are made with good materials but have a rougher finish level from the factory. A premium axe will be $150-$250 and made with higher-end materials and extra hand fitting and finishing. An artisanal axe will be $200-$500, hand-made, and finely finished.
How do you sharpen an axe?
What is a splitter axe?
A splitting axe is a cutting tool that has a tapered head commonly made of metal and will weight approximately 3 to 6 pounds. A splitting axe has been designed to split wood along the grain to break apart the fibres. This is different from the traditional axe which was designed to chop wood across the grains.
How sharp should an axe be?
There seems to be some confusion out there on how sharp an axe should be. A chopping axe should be razor-sharp – but a splitting maul doesn't need to be sharp, it should be dull. Or an axe blade should be sharp enough to cut toilet paper, or you should have a 'working edge' not a razor edge.
What angle sharpens axe?
Ideally, the angle should be a about 25 degrees (and slightly convex). Continue to file equally on both sides of the blade until the sharpening gauge pattern fits perfectly. Next, it's time for your whetstone to do its job: honing the edge. Store your axe in a dry place, out of direct sunlight.
How do you make a splitting maul?
How do I know if my axe is good?
What is the point of a double sided axe?
With two blades that can be tailored to suit a variety of tasks, a double bit axe is an extremely versatile tool. It can be used for precise chopping of trees and branches, and also deal with the nasty stuff like hacking up stubborn roots and splitting knotted, gnarly logs – all with a single cutting tool.
What is a hewing axe?
The Hewing Axe was used by lumbermen for squaring timbers for rafting and stowage in vessels, and by carpenters for smoothing beams, planks and rafters. For these purposes the inner or left side of the axe in contact with the timber was straight and level.
How much did a Viking axe weigh?
The haft, while not original, is ancient. The total weight of the axe is only 770g (1.7 lb.), less than some swords.
Why is an axe better than a sword?
If a diamond sword does 7 damage, then a diamond axe would do 9 damage. To get the most damage, you have to wait a bit more for the cooldown to finish. Using an axe is sometimes quicker because you need to hit an enemy once, and it might just die right then and there, whereas a sword would take 2 or 3 hits.
Did Vikings use battle axes?
Vikings most commonly carried sturdy axes that could be thrown or swung with head-splitting force. The Mammen Axe is a famous example of such battle-axes, ideally suited for throwing and melee combat. An axe head was mostly wrought iron, with a steel cutting edge.
What is the heaviest axe head?
A heavy type of axe specialized for splitting wood along the grain. These tend to have a hefty wedge-shaped head weighing about eight pounds, sharp on end and a blunt edge on the other. This is a very heavy tool and is designed specifically for downward-swinging chops.
What is a Michigan axe used for?
Michigan Axe. This axe is a common shape for felling axes, having originally risen to popularity in the 1860s. It has a curved head, which is ideal for chopping large trees and dense wood types.
What is a Hudson Bay axe used for?
Used for light splitting, chopping, driving tent pegs, etc. The pattern is thought to have originated from “Biscayan” in Northern Spain, near France. French traders used this hand axe as a trade tool in their dealings with Native Americans for fur and other commodities in the Hudson Bay area, St.
What is the strongest axe in history?
Without further ado, here are the 25 most powerful axes that ever existed.
Why are wives called battle axes?
It was once fairly common to demean a forceful older woman by calling her a battle-ax, too. This American slang was inspired by temperance activist Carrie Nation and is now considered offensive and outdated.